User's Manual

Installing the Outdoor Unit
Manual Revision 1.0
2-9
Connecting the Ground and Antenna
Cables
The Ground terminal (marked ╤) is located on the bottom panel of the
outdoor unit. The Antenna RF connector (marked
) is located on the
top panel of the AU-ODU.
1. Connect one end of a grounding cable to the ground terminal and
tighten the ground screw firmly.
2. Connect the other end of the ground cable to a ground connection.
1. Connect one end of the coaxial RF cable to the RF connector on the
top panel of the unit
2. Connect the other end of the RF cable to the antenna.
3. The RF connectors should be sealed properly to protect against rain
and moisture
Figure 2-3: Bottom Panel of the Outdoor Unit (without the seal assembly)
NOTE
To prepare the ground cable:
To connect the RF cable (units with external antenna)):