User's Manual

Chapter 2 - Installation
BreezeACCESSS VL System Manual
2-4
Additional Installation Requirements
The following items are also required to install the BreezeACCESS VL
system components:
! Indoor-to-outdoor Category 5 Ethernet cable with shielded RJ-45
connectors * (available in different lengths. For more details refer to
Indoor-to-Outdoor Cables
on page 2-5).
! Ethernet cable (straight for connecting to a hub/switch etc., crossed
for connecting directly to a PC’s NIC)
! Crimping tool for RJ-45 connectors.
! Antenna, for E model units supplied without an antenna
! Ground cables with an appropriate termination.
! Mains plug adapter or termination plug (if the power plug on the
supplied AC power cord does not fit local power outlets).
! Portable PC with Ethernet card and Telnet software or
BreezeCONFIG ACCESS VL* application and a crossed Ethernet
cable.
! Installation tools and materials, including appropriate means (e.g. a
pole) for installing the outdoor unit.
NOTE
Items marked with an asterisk (*) are available from Alvarion.