User's Manual

Appendix F - Parameters Summary
BreezeACCESSS VL System Manual
F-10
Service Parameters
Table F-7: Service Parameters
Parameter Unit Range Default Run-Time
User Filtering
Option
SU
! Disable
! IP Protocol Only
! User Defined Addresses Only
! PPPoE Protocol Only
Disable Yes
Set User Filter
Address
SU IP address (8 entries) 0.0.0.0
(all 8 entries)
Yes
Set User Filter
Mask
SU IP address (8 entries) 255.255.255.255
(all 8 entries)
Yes
Set User Filter
Range
SU 0 – 255. 0 means that the range is
not used.
0
(all 8 entries)
Yes
MIR: Downlink SU SU-3: 128-2048 (Kbps)
SU-6: 128-3968 (Kbps)
SU-54: 128-32896 (Kbps)
SU-3: 2048
SU-6: 3968
SU-54: 32896
No
MIR: Uplink SU SU-3: 128-2048 (Kbps)
SU-6: 128-3968 (Kbps)
SU-54: 128-32896 (Kbps)
SU-3: 2048
SU-6: 3968
SU-54: 32896
No
CIR: Downlink SU SU-3: 0-2048 (Kbps)
SU-6: 0-3968 (Kbps)
SU-54: 0-32896 (Kbps)
0 (Kbps No
CIR: Uplink SU SU-3: 0-2048 (Kbps)
SU-6: 0-3968 (Kbps)
SU-54: 0-32896 (Kbps)
0 (Kbps) No
Maximum
Delay
SU 300 – 10,000 (ms) 5,000 (ms) No
Maximum Burst
Duration
AU, SU 0 – 2,000 (ms) 5 (ms) No
Graceful
Degradation
Limit
AU 0 – 70 (%) 70 (%) No
MIR Only
Option
AU Disable, Enable Enable No