User's Manual

Parameters Summary
Manual Revision 1.0
F-9
Table F-5: Bridge Parameters
Parameter Unit Range Default Run-Time
MAC Address
Deny List
AU Up to 100 MAC addresses None (empty) Yes
Roaming
Option
SU
! Disable
! Enable
Disable No
Performance Parameters
Table F-6: Performance Parameters
Parameter Unit Range Default Run-Time
RTS Threshold AU, SU 20 – 1600 (bytes) AU: 1600
SU: 60
Yes
Minimum
Contention
Window
AU, SU 0, 7, 15, 31, 63, 127, 255,
511, 1023
15 Yes
Maximum
Contention
Window
AU, SU 7, 15, 31, 63, 127, 255, 511,
1023
1023 Yes
Maximum
Modulation Level
AU, SU According to the Min/Max
Modulation Level defined for
the Sub Band
The highest available
value
Yes
Multicast
Modulation Level
AU According to the Min/Max
Modulation Level defined for
the Sub Band
The lowest available
value
Yes
Number of HW
Retries
AU, SU 1 - 15 10 Yes
Average SNR
Memory Factor
AU, SU -1 to 32 5 Yes
Burst Mode
Option*
AU, SU
! Disable
! Enable
Enable No
Burst Mode Time
Interval*
AU, SU 1 to the value defined in the
Sub Band for Maximum
Burst Duration (milliseconds)
5 milliseconds or the
value of Maximum
Burst Duration
defined for the Sub
Band (the lower of the
two values).
Yes
Adaptive
Modulation
Option
AU, SU
! Disable
! Enable
Enable No
Minimum Interval
Between
Adaptive
Modulation
Messages
AU, SU 1-3600 (seconds) 4 (seconds) Yes
* Applicable only if Burst Mode is supported by the Sub Band.