User's Manual

Parameters Summary
Manual Revision 1.0
F-5
Table F-3: Air Interface Parameters
Parameter Unit Range Default Run-Time
Channel Check
Time**
AU 1 – 3600 (seconds) 60 (seconds) No
Channel Avoidance
Period**
AU 1 – 60 (minutes) 30 (minutes) No
SU Waiting
Option**
AU
! Disable
! Enable
Enable No
Minimum Pulses to
Detect**
AU 1-100 6 No
Clear radar
Detected Channels
After Reset**
AU
! Disable
! Enable
Disable Yes
Country Code
Learning by SU
AU
! Disable
! Enable
Enable Yes
Tx Power For
Modulation Levels
1 to 5
AU, SU -10 dBm to a value
determined by the HW,
Country Code and other
parameters
The highest
allowed value
Yes
Tx Power For
Modulation Level 6
AU, SU -10 dBm to a value
determined by the HW,
Country Code and other
parameters
The highest
allowed value
Yes
Tx Power For
Modulation Level 7
AU, SU -10 dBm to a value
determined by the HW,
Country Code and other
parameters
The highest
allowed value
Yes
Tx Power For
Modulation Level 8
(HW rev. B only)
AU, SU -10 dBm to a value
determined by the HW,
Country Code and other
parameters
The highest
allowed value
Yes
Max Tx Power For
Modulation Levels
1 to 5
SU -10 dBm to a value
determined by the HW,
Country Code and other
parameters
The highest
allowed value
Yes
Max Tx Power For
Modulation Level 6
SU -10 dBm to a value
determined by the HW,
Country Code and other
parameters
The highest
allowed value
Yes
Max Tx Power For
Modulation Level 7
SU -10 dBm to a value
determined by the HW,
Country Code and other
parameters
The highest
allowed value
Yes
Max Tx Power For
Modulation Level 8
(HW rev. B only)
SU -10 dBm to a value
determined by the HW,
Country Code and other
parameters
The highest
allowed value
Yes
ATPC Option AU, SU
! Disable
! Enable
Enable Yes