User's Manual

Appendix F - Parameters Summary
BreezeACCESSS VL System Manual
F-2
Parameters Summary
Unit Control Parameters
Table F-1: Unit Control Parameters
Parameter Unit Range Default Run-Time
Change Unit Name AU, SU Up to 32 printable ASCII
characters
None Yes
Change Read Only
Password
AU, SU Up to 8 printable ASCII
characters
public No
Change Installer
Password
AU, SU Up to 8 printable ASCII
characters
user No
Change
Administrator
Password
AU, SU Up to 8 printable ASCII
characters
private No
FTP SW Version
File Name
AU, SU Up to 20 printable ASCII
characters. An empty string
is not allowed.
VxWorks.bz Yes
Configuration File
Name
AU, SU Up to 20 printable ASCII
characters. An empty string
is not allowed.
config.cfg Yes
Operator Defaults
File Name
AU, SU Up to 20 printable ASCII
characters. An empty string
is not allowed.
operator.cmr Yes
FTP Source Dir AU, SU Up to 80 printable ASCII
characters. Use “.” to clear.
None (empty) Yes
FTP Client IP
Address
AU, SU IP address 1.1.1.3 No
FTP Client IP Mask AU, SU IP address 255.255.255.0 No
FTP Server IP
Address
AU, SU IP address 1.1.1.4 No
FTP Gateway IP
Address
AU, SU IP address 0.0.0.0 No
FTP User Name AU, SU Up to 18 printable ASCII
characters
vx No
FTP Password AU, SU Up to 18 printable ASCII
characters
Vx No
FTP Log File Name AU, SU Up to 20 printable ASCII
characters
logfile.log Yes
FTP Log File
Destination
Directory
AU, SU Up to 80 printable ASCII
characters. Use “.” to clear.
None (empty) Yes
Event Log Policy AU, SU
! Message
! Warning
! Error
! Fatal
! Log None
Warning Yes
Log Out Timer AU, SU 1-999 minutes 5 Yes