User's Manual

Appendix E - Supported MIBs and Traps
BreezeACCESSS VL System Manual
E-38
Supported Traps
NOTE
An * is used instead of the brzaccVL prefix.
Trap Variables
Table E-13: Trap Variables
MIB Parameter Description Value/Range
*Traps
(breezeAccessVLMib 14)
*TrapSUMacAddr
(*Traps 1)
Applicable to AU/BU. An SU/RB
MAC address.
MAC address
*TrapText
(*Traps 3)
Applicable to all units. Textual
string for future use.
DisplayString
*TrapToggle
(*Traps 4)
Applicable to all units. An On/Off
toggle status.
Integer
on (1)
off (2)
*TrapParameterChanged
(*Traps 5)
Applicable to all units. A
modification to one of the
parameters related to IP
Filtering, MIR/CIR or VLAN.
Integer
cirOrMir (1)
ipFilter (2)
vlan (3)
*TrapAccessRights
(*Traps 6)
Applicable to all units. The
access rights used for login.
Integer
notLoggedIn (1)
readOnly (2)
installer (3)
administrator (4)
factory (5)
*TrapLog
(*Traps 7)
Applicable to all units. Login or
logout to the Monitor program
Telnet.
Integer
telnetLogin (1)
telnetLogout (2)
*TrapTelnetUserIpAddress
(*Traps 8)
Applicable to all units. The IP
address of a Telnet user.
IP address
*TrapRTx
(*Traps 9)
Applicable to AU/BU.
Retransmissions rate.
*TrapFtpOrTftpStatus
(*Traps 10)
Applicable to all units.
The status of the last FTP/TFTP
loading process.
successful (1)
failed (2)
*TrapDFSMoveFreq
(*Traps 11)
Applicable to AU/BU. The new
frequency after detecting radar
on a previous channel.
Integer