User's Manual

breezAccessVLMib
Manual Revision 1.0
E-33
Table E-12: Site Survey Parameters
MIB Parameter Description Value/Range
*DroppedFrameEvents
(*TxEvents 1)
Applicable to all units. The
number frames that were
dropped because they were
retransmitted to the maximum
allowed number of
retransmissions without being
acknowledged.
Counter 32
*FrameDelayedDueToSwRetry
(*TxEvents 2)
Applicable to all units. The
number of frames that were
delayed because the SW retry
algorithm was activated on a
previous frame designated for
the same recipient.
Counter 32
*Underrun Events
(*TxEvents 3)
Applicable to all units. The
number of frames whose
transmission was aborted
because the rate of submitting
frames for transmission
exceeds the available
transmission capability.
Counter 32
*OtherTxEvents
(*TxEvents 4)
Applicable to all units. The
number of Tx events due to
problems other than those
represented by the other Tx
Events counters.
Counter 32
*TotalTxEvents
(*TxEvents 5)
Applicable to all units. The total
number of Tx events.
Counter 32
*RxEvents
(*WirelessLinkEvents 2)
Applicable to all units.
Read-only. Rx errors counters.
*PhyErrors
(*RxErrors 1)
Applicable to all units. Read-
only. Applicable only when
DFS is enabled. The number of
unidentified signals.
Counter 32
*CRCEvents
(*RxEvents 2)
Applicable to all units. Read-
only. The number of frames
received from the wireless
media containing CRC errors.
Counter 32
*OverrunEvents
(*RxEvents 3)
Applicable to all units. Read-
only. The number of frames
that were discarded because
the receive rate exceeded the
processing capability or the
capacity of the Ethernet port.
Counter 32
*RxDecryptEvents
(*RxEvents 4)
Applicable to all units. Read-
only. The number of frames
that were not received properly
due to a problem in the data
decryption mechanism.
Counter 32
*TotalRxEvents
(*RxEvents 5)
Applicable to all units. Read-
only. The total number of Rx
events.
Counter 32
*PerModulationLevelCounters
(*TrafficStatistics 5)
Per Modulation Level
Counters.
*ResetPerModulationLevelCounters
(*PerModulationLevelCounters 1)
Applicable to all units. Resets
the Per Modulation Level
Counters
Integer
resetCounters (1)
cancel (2)