User's Manual

breezAccessVLMib
Manual Revision 1.0
E-27
Table E-9: User Filtering Parameters
MIB Parameter Description Value/Range
*IpFilterIdx
(*IpFilterEntry 4)
Applicable to SU/RB.
Read-only. A table index for
the IP Filter entry.
Integer
1-8
*DeleteOneUserFilter
(*UserFilterParams 3)
Applicable to SU only.
Deletes a single selected
entry from the IP Filter table.
Integer
deletefirstEntry (1)
deletesecondEntry (2)
deletethirdEntry (3)
deletefourthEntry (4)
deletefifthEntry (5)
deletesixthEntry (6)
deleteseventhEntry (7)
deleteeighthEntry (8)
cancelOperation (9)
na (255)
*DeleteAllUserFilters
(*UserFilterParams 4)
Applicable to SU/RB.
Deletes all entries from the
IP Filter table.
Integer
deleteAll (1)
cancelOperation (2)
na (255)
Security Parameters
Table E-10: Security Parameters
MIB Parameter Description Value/Range
*SecurityParams
(breezeAccessVLMib 9)
*AuthenticationAlgorithm
(*SecurityParameters 1)
Applicable to all units.
Enables/disables the
authentication encryption
option.
openSystem: Authentication
messages are not encrypted.
sharedKey : Authentication
messages are encrypted.
Integer
openSystem (1)
sharedKey (2)
*DefaultKey
(*SecurityParameters 2)
Applicable to SU/RB. The ID
of the key to be used for
encrypting/decrypting the
authentication messages.
Integer
Range: 1 to 4.
*DataEncryptionOption
(*SecurityParameters 3)
Applicable to all units.
Enables/disables the data
encryption option.
Integer
disable (1)
enable (2)
*DefaultMulticastKey
(*SecurityParameters 4)
Applicable to AU/RB. The ID
of the key to be used for
encrypting/decrypting
multicasts.
Integer
Range: 1 to 4.
*SecurityMode
(*SecurityParameters 5)
Applicable to all units. The
encryption algorithm to be
used for authentication
messages and/or data
encryption
Integer
wep (1)
aes (2)