User's Manual

Appendix E - Supported MIBs and Traps
BreezeACCESSS VL System Manual
E-26
User Filtering Parameters
Table E-9: User Filtering Parameters
MIB Parameter Description Value/Range
*UserFilterParams
(breezeAccessVLMib 8)
Applicable to SU/RB. User
filtering parameters.
*UserFilterOption
(*UserFilterParams 1)
Applicable to SU only.
Defines user-filtering
options.
disable: No filtering.
iPOnly: Only IP protocol
packets pass.
userDefinedAddrOnly: Only
IP frames from/to user
defined IP addresses pass.
pPPoE Only: Only PPPoE
frames pass.
Integer
disable (1)
ipOnly (2)
userDefinedAddrOnly (3)
pPPoEOnly (4)
na (255)
*IpFilterTable
(*UserFilterParams 2)
Applicable to SU/RB. A
table of up to 8 user defined
addresses, or address
groups, to be used if the
User Filtering Option
(*UserFilterOption) is
userDefinedAddrOnly. Not
accessible.
*IpFilterEntry
(*IpFilterTable 1)
Applicable to SU/RB. An IP
Filter table entry. Not
accessible.
*IpID
(*IpFilterEntry 1)
Applicable to SU/RB. An IP
address in the IP Filter
table.
IP Address
*MaskID
(*IpFilterEntry 2)
Applicable to SU/RB. An IP
mask for the IP Filter entry.
Either a mask or a range,
but not both can be used to
define an address group. If
the range is other than 0,
than the mask is ignored
and only the range value is
used to define the address
group.
IP Address
*IpFilterRange
(*IpFilterEntry 3)
Applicable to SU/RB. An
address range for the IP
Filter entry. The first
address in the range is the
IP address (*iPID). O means
that the range is not used.
Either a mask or a range,
but not both can be used to
define an address group. If
the range is other than 0,
than the mask is ignored
and only the range value is
used to define the address
group.
Integer
0 - 255