User's Manual

breezAccessVLMib
Manual Revision 1.0
E-25
Table E-8: Service Parameters
MIB Parameter Description Value/Range
*CirDownlink
(*ServiceParameters 4)
Applicable to SU only. Not
applicable to BreezeNET B
products. The Committed
Information Rate (CIR) from
AU to SU.
CIR must be below
brzaccVLMirDownlink value.
Integer
Range for Set:
SU-3: 0 – 2,048 (Kbps)
SU-6: 0 – 3,968 (Kbps)
SU-54: 0 – 32,896 (Kbps)
The actual value (Get) will be
the entered value rounded to
the nearest multiple of 128
(N*128).
BreezeNET B products will
return 65535 for na.
*CirUplink
(*ServiceParameters 5)
Applicable to SU only. Not
applicable to BreezeNET B
products. The Committed
Information Rate (CIR) from
SU to AU.
CIR must be below
brzaccVLMirUplink value.
Integer
Integer
Range for Set:
SU-3: 0 – 2,048 (Kbps)
SU-6: 0 – 3,968 (Kbps)
SU-54: 0 – 32,896 (Kbps)
The actual value (Get) will be
the entered value rounded to
the nearest multiple of 128
(N*128).
BreezeNET B products will
return 65535 for na.
*MaxDelay
(*ServiceParameters 6)
Applicable to SU only. Not
applicable to BreezeNET B
products. The maximal time
packets may be delayed by
the CIR\MIR mechanism.
Above the configured
maximal period the packets
are discarded.
Integer
Range: 300 - 10000
(milliseconds)
BreezeNET B products will
return 65535 for na.
*MaxBurstDuration
(*ServiceParameters 7)
Applicable to AU and SU.
Not applicable to
BreezeNET B products.
The maximum time during
which inactivity bonus time
can be accumulated for
future burst transmissions.
Integer
Range: 0 – 2000
(milliseconds)
BreezeNET B products will
return 65535 for na.
*GracefulDegradationLimit
(*ServiceParameters 8)
Applicable to AU only. Not
applicable to BreezeNET B
products. The maximum
limit for activating the
graceful degradation
algorithm.
Integer
Range: 0 – 70 (%)
na (255)
*MirOnlyOption
(*ServiceParameters 9)
Applicable only to AU. Not
applicable to BreezeNET B
products. When enabled, it
overrides the CIR/MIR
algorithm for determining
actual information rate and
forces the algorithm to
operate with MIR
parameters’ settings only.
When enabled, the Graceful
Degradation algorithm is
disabled.
Integer
disable (1)
enable (2)
na (255)