User's Manual

Appendix E - Supported MIBs and Traps
BreezeACCESSS VL System Manual
E-24
Table E-7: Air Interface Parameters
MIB Parameter Description Value/Range
*UnitWithMaxDistance
(*CellDistanceParameters 4)
Applicable AU only. Not
applicable to BreezeNET B
units. The MAC address of
the unit with the maximum
distance from the AU.
MAC Address
*ScanningMode
(*AirInterface 16)
Applicable to SU/RB. The
scanning mode. In cells
where the DFS Option is
enabled Scanning Mode is
forced to Passive.
Integer
passive (1)
active (2)
*Antenna Gain
(*AirInterface 17)
Applicable to all units. Read-
write in units where
*AntennaGainChange is
supported. Read-only in
units where
*AntennaGainChange is not
supported. The net gain
(including cable attenuation
for detached antennas) of
the antenna.
Integer
0-50 (dB)
-1 (not configurable) means
“Not Set Yet”.
-2 (not configurable) means
“Don’t Care”.
Service Parameters
Table E-8: Service Parameters
MIB Parameter Description Value/Range
*ServiceParameters
(breezeAccessVLMib 7)
Applicable to all units.
Service parameters.
*MirDownlink
(*ServiceParameters 2)
Applicable to SU/RB. The
Maximum Information Rate
(MIR) from AU/BU to
SU/RB. MIR must be above
brzaccVLCirDownlink value.
Integer
Range for Set:
SU-3: 128 – 2,048 (Kbps)
SU-6: 128 – 3,968 (Kbps)
SU-54: 128 – 32,896 (Kbps)
RB-14: 128 – 6,912 (Kbps)
RB-28:128 – 22,016 (Kbps)
The actual value (Get) will be
the entered value rounded to
the nearest multiple of 128
(N*128)
*MirUplink
(*ServiceParameters 3)
Applicable to SU/RB. The
Maximum Information Rate
(MIR) from SU/RB to
AU/BU. MIR must be above
brzaccVLCirUplink value.
Integer
Range for Set:
SU-3: 128 – 2,048 (Kbps)
SU-6: 128 – 3,968 (Kbps)
SU-54: 128 – 32,896 (Kbps)
RB-14: 128 – 6,912 (Kbps)
RB-28: 128 – 22,016 (Kbps)
The actual value (Get) will be
the entered value rounded to
the nearest multiple of 128
(N*128)