User's Manual

Appendix E - Supported MIBs and Traps
BreezeACCESSS VL System Manual
E-22
Table E-7: Air Interface Parameters
MIB Parameter Description Value/Range
*DFSChannelCheckTime
(*DFSParameters 3)
Applicable to AU/BU.
Defines the time the unit
checks the channel for
presence of radar signals
and does not transmit after
power up or association
or after moving to a new
channel due to detecting
radar in the previously used
channel.
Integer
Range: 1 to 3600 (seconds).
*DFSChannelAvoidancePeriod
(*DFSParameters 4)
Applicable to AU/BU.
Defines the time after
detecting radar signals in a
channel of avoiding using
the channel or adjacent
channels in accordance with
the bandwidth.
Integer
Range: 1 to 60 (minutes).
*DFSSuWaitingOption
(*DFSParameters 5)
Applicable to AU/BU.
Defines whether the
associated SUs may should
wait for this AU/BU after it
stopped transmitting due to
radar detection, before they
starts scanning for other
AUs/BUs.
Integer
disable (1)
enable (2)
na (255)
*DFSClearRadarChannels
(*DFSParameters 6)
Applicable to AU/BU.
Clear Radar Detected and
Adjacent to Radar channels
after unit reset.
Returns the unit to operate
in default frequency
Integer
cancel (1)
clearRadarChannels (2)
na (255)
*DFSRadarDetectionChannelsTabl
e
(*DFSParameters 7)
Applicable to AU/BU.
Applicable only when DFS
option is on. Displays the
current channels defined in
the sub-band and their radar
detection status.
*DFSMinimumPulsesToDetect
(*DFSParameters 8)
Applicable to AU/BU.
Defines the minimum
number of pulses to detect
radar.
Integer
1 - 100
*DFSRadarDetectionChannelsEntr
y
(*DFSRadarDetectionChannelsTa
ble 1)
Applicable to AU/BU.
An entry in the DFS Radar
Detection Channels Table.
*DFSChannelIdx
(*DFSRadarDetectionChannelsEnt
ry 1)
Applicable to AU/BU. Read-
only. The index of the entry
in the DFS Radar Detection
Channels Table.
Integer
*DFSChannelFrequency
(*DFSRadarDetectionChannelsEnt
ry 2)
Applicable to AU/BU. Read-
only. The frequency of a
channel in the DFS Radar
Detection Channels Table.
Integer
*DFSChannelRadarStatus
(*DFSRadarDetectionChannelsEnt
ry 3)
Applicable to AU/BU.
The radar detection status
of a channel in the DFS
Radar Detection Channels
Table.
Integer
radarFree (1)
adjacentToRadar (2)
radarDetected (3)