User's Manual

Appendix E - Supported MIBs and Traps
BreezeACCESSS VL System Manual
E-20
Table E-7: Air Interface Parameters
MIB Parameter Description Value/Range
*NeighborAuAssocLoadStatus
(*NeighborAuEntry 5)
Applicable to SU/RB. Read-
only. The load status of the
AU/BU associated with the
entry in the Neighboring
AU/BU Table. Full means
that it has reached its
maximum permitted load,
meaning in AU that the
number of associated SUs
is the Maximum Number Of
Associations (for AU) or in
BU that it is already
associated with an RB.
Integer
full (1)
notFull (2)
na (255)
*NeighborAuMark
(*NeighborAuEntry 6)
Applicable to SU/RB. Read-
only. The overall mark given
by the Best AU/BU
algorithm to the AU/BU
associated with the entry in
the Neighboring AU/BU
Table.
Integer
*FrequencyDefinition
(*AirInterface 12)
Frequency Definition
parameters
*FrequencySubsetTable
(*FrequencyDefinition 4)
Applicable to all units. Not
accessible. The Frequency
Subset table that includes
all frequencies from the
Sub-band Lower Frequency
to the Sub-band Upper
Frequency, using steps as
defined by the Scanning
Step
*FrequencySubsetEntry
(FrequencySubsetTable 1)
Applicable to all units. Not
accessible. An entry in the
Frequency Subset table.
*FrequencySubsetTableIdx
(*FrequencySubsetEntry 1)
Applicable to all units. Read-
only. The index of an entry
in the Frequency Subset
table.
Integer
*FrequencySubsetFrequency
(*FrequencySubsetEntry 2)
Applicable to all units. Read-
only. The frequency of an
entry in the Frequency
Subset table.
Integer
*FrequencySubsetActive
(*FrequencySubsetEntry 3)
Applicable to all units. Read-
only. The status of an entry
in the Frequency subset
Table. Only frequencies of
active entries will be
included in the final list of
frequencies to be used for
scanning.
Integer
active (1)
notActive (2)
*SetSelectedFreqsSubset
(*FrequencyDefinition 5)
Applicable to all units. Apply
the selected subset. After
the next reset the new
subset will be used for
scanning.
Integer
SetSelectedFreqsSubset (1)
cancel (2)