User's Manual

Appendix E - Supported MIBs and Traps
BreezeACCESSS VL System Manual
E-16
Table E-6: Bridge Parameters
MIB Parameter Description Value/Range
*NumberOfMacAddressesInDenyList
(*MacAddressDenyList 4)
Applicable to AU only. Not
applicable to BreezeNET B
units. Read only. The
number of MAC addresses
in the MAC Address Deny
List Table.
Integer
Range: 1 to 100
Air Interface Parameters
Table E-7: Air Interface Parameters
MIB Parameter Description Value/Range
*AirInterface
(breezeAccessVLMib 6)
Applicable to all units. Air
Interface parameters.
*ESSIDParameters
(*AirInterface 1)
Applicable to all units.
ESSID Parameters.
*ESSID
(*ESSIDParameters 1)
Applicable to all units. The
Extended Service Set ID
(ESSID) used to prevent the
merging of collocated
systems. The ESSID is
accessible only with the
write community string
(administrator password).
DisplayString (SIZE(31))
Up to 31 printable case
sensitive ASCII characters.
*OperatorESSIDOption
(*ESSIDParameters 2)
Applicable to AU/BU only.
Enabling/disabling the use
of the Operator ESSID
Integer
disable (1)
enable (2)
na (255)
*OperatorESSID
(*ESSIDParameters 3)
Applicable to AU/BU only. A
secondary ESSID to support
easy installation of SUs as
well as the use of the Best
AU/BU feature. Accessible
only with SNMP Write
Community string
(administrator password).
DisplayString (SIZE(31))
Up to 31 printable case
sensitive ASCII characters.
*RunTimeESSID
(*ESSIDParameters 1)
Applicable to SU/RB only.
The ESSID of the
associated AU/BU.
Accessible only with SNMP
Write Community string
(administrator password).
DisplayString (SIZE(31))
Up to 31 printable case
sensitive ASCII characters.