User's Manual

breezAccessVLMib
Manual Revision 1.0
E-15
Table E-6: Bridge Parameters
MIB Parameter Description Value/Range
*RoamingOption
(*BridgeParameters 9)
Applicable to SU/RB
only.Disable/enable the
roaming feature. When
enabled, the SU will start
scanning for an AU/RB after
one second of not receiving
beacons from current
AU/BU. Once it found a new
AU/BU, it will also send
through the wireless network
a roaming SNAP on behalf
of its clients informing other
devices in the network of
their new location. When
disabled, it will wait for
seven seconds before
starting scanning, and it will
not send roaming SNAPs.
Integer
disable (1)
enable (2)
na (255)
*MacAddressDenyList
(*BridgeParameters 10)
MAC Address Deny List
parameters
*MacAddressDenyListTable
(*MacAddressDenyList 1)
Applicable to AU only. Not
applicable to BreezeNET B
units. A list of up to 100
MAC Addresses of SUs that
are not allowed to transfer
data to the AU. Not
accessible.
*MacAddressDenyListEntry
(*MacAddressDenyListTable 1)
Applicable to AU only. Not
applicable to BreezeNET B
units. An entry in the Mac
Address Deny List Table.
Not accessible.
*MacAddressDenyListTableIdx
(*MacAddressDenyListEntry 1)
Applicable to AU only. Not
applicable to BreezeNET B
units. A read only table index
for a MAC Address entry in
the Mac Address Deny List
Table.
Integer
Range: 1 to 100
*MacAddressDenyListId
(*MacAddressDenyListEntry 2)
Applicable to AU only. Not
applicable to BreezeNET B
units. The list of MAC
Addresses in the MAC
Address Deny List Table. To
Remove a MAC Address -
SET the corresponding entry
to 0. To Add a new MAC
Address - SET an entry
which is currently 0.
MAC Address
*MacAddressDenyListAdd
(*MacAddressDenyList 2)
Applicable to AU only. Not
applicable to BreezeNET B
units. Add a MAC address to
the MAC Address Deny List
Table
MAC Address
*MacAddressDenyListRemove
(*MacAddressDenyList 3)
Applicable to AU only. Not
applicable to BreezeNET B
units. Remove a MAC
address from the MAC
Address Deny List Table
MAC Address