User's Manual

Appendix E - Supported MIBs and Traps
BreezeACCESSS VL System Manual
E-12
Bridge Parameters
Table E-6: Bridge Parameters
MIB Parameter Description Value/Range
*BridgeParameters
(breezeAccessVLMib 5)
Bridge parameters.
*VLANSupport
(*BridgeParameters 1)
Applicable to all units. VLAN
support parameters.
Applicable to Access Link
only.
*VlanID
(*VLANSupport 1)
Applicable to SU/RB only.
VLAN ID for data frame
tagging.
Integer
1-4094.
0 –na (no VLAN ID)
*EthernetLinkType
(*VLANSupport 2)
Applicable to all units. VLAN
support mode (Link Type).
The accessLink option is not
available for AU.
Integer
accessLink (1)
trunkLink (2)
hybridLink (3)
*ManagementVID
(*VLANSupport 3)
Applicable to all units. VLAN
ID for management frame
tagging.
Integer
1-4094
65535 - no VLAN tagging.
*VLANForwarding
(*VLANSupport 4)
VLAN forwarding feature
parameters.
*VlanForwardingSupport
(*VLANForwarding 1)
Applicable to all units.
Enables or disables the
VLAN forwarding feature.
Applicable to Trunk links
only.
Integer
disable (1)
enable (2)
na (255)
*VlanForwardingTable
(*VLANForwarding 2)
Applicable to all units. A
table of up to 20 VLAN IDs
of devices to which data
frames are forwarded when
the VLAN Forwarding
feature is Enabled.
Applicable to Trunk links
only. Not accessible.
*VlanForwardingEntry
(*VlanForwardingTable 1)
Applicable to all units. A
VLAN Forwarding Table
entry. Applicable to Trunk
links only. Not accessible.
*VlanForwardingTableIdx
(*VlanForwardingEntry 1)
Applicable to all units. A
read only table index for a
VLAN entry in the VLAN
Forwarding Table.
Integer
1-20
*VlanIdForwarding
(*VlanForwardingEntry 2)
Applicable to all units. The
list of VLAN ID's in the VLAN
ID Forwarding Table. To
remove a VLAN ID - SET the
corresponding entry to 0. To
add a new VLAN ID SET an
entry which is now 0.
Integer
1-4094
0-remove entry.
*VLANRelaying
(*VLANSupport 5)
VLAN Relaying feature
parameters. Not applicable
to BreezeNET B products.