User's Manual

breezAccessVLMib
Manual Revision 1.0
E-11
IP Parameters
Table E-5: IP Parameters
MIB Parameter Description Value/Range
*IpParams
(breezeAccessVLMib 4)
*UnitIpAddress
(*IpParams 1)
Applicable to all units. IP
address of the unit.
IP address
*SubNetMask
(*IpParams 2)
Applicable to all units. Subnet
mask of the unit.
IP address
*DefaultGWAddress
(*IpParams 3)
Applicable to all units. Default
gateway IP address of the unit.
IP address
*UseDhcp
(*IpParams 4)
Applicable to all units. DHCP
client mode of operation.
disable: Use regular (manual)
methods to configure IP
parameters.
DHCP Only: Use DHCP server
to configure IP parameters.
automatic: Use DHCP server to
configure IP parameters. If a
DHCP server is not available,
use manually configured values
for *UnitIpAdress, *SubnetMask
and *DefaultGWAdress.
Integer
disable (1)
dHCPOnly (2)
automatic (3)
*AccessToDHCP
(*IpParams 5)
Applicable to all units. The port
to be used for communicating
with a DHCP server.
Integer
fromWirelessOnly (1)
fromEthernetOnly (2)
fromBothWirelessAndEthernet (3)
*RunTimeIPaddr
(*IpParams 6)
Applicable to all units.
Read-only: The run-time IP
address. If DHCP is used, the
run-time IP address is the
address given to the unit by the
server. Alternatively the static
IP address is used.
IP address
*RunTimeSubNetMask
(*IpParams 7)
Applicable to all units.
Read-only: The run-time subnet
mask. If DHCP is used, the
run-time subnet mask is the
mask given to the unit by the
server. Alternatively the static
subnet mask value is used.
IP address
*RunTimeDefaultIPGateway
(*IpParams 8)
Applicable to all units.
Read-only: The run-time
Gateway IP address. If DHCP is
used, the Run Time Gateway IP
Address is the address given to
the unit by the server.
Alternatively, the static default
gateway is used.
IP address