User's Manual

breezAccessVLMib
Manual Revision 1.0
E-9
Table E-3: Unit Control Parameters
MIB Parameter Description Value/Range
*EventLogFileName
(*EventLogFileUploading 1)
Applicable to all units. The
name of the event log file
to be uploaded.
DisplayString (SIZE(80)).
Up to 20 printable ASCII
characters.
*EventLogDestinationDir
(*EventLogFileUploading 2)
Applicable to all units. The
destination directory for
the event logd file in the
FTP server
DisplayString (SIZE(80)).
Up to 80 printable ASCII
characters. Use “.” To clear
field.
*UploadEventLogFile
(*EventLogFileUploading 3)
Applicable to all units.
Execution of the event log
upload operation
Integer
uploadFile (1)
cancel (2)
*LoadingStatus
(*UnitControl 11)
Applicable to all units. The
status of an FTP or TFTP
loading process.
Integer
inProcess (1)
successful (2)
failed (3)
*EventLogFileParams
(*UnitControl 12)
Event Log parameters
*EventLogPolicy
(*EventLogFileParams 1)
Applicable to all units. The
lowest severity of events
to be logged.
Integer
message (1)
warning (2)
error (3)
fatal(4)
logNone(5)
*EraseEventLog
(*EventLogFileParams 2)
Applicable to all units.
Erase the log file.
Integer
eraseEventLog (1)
cancel(2)
*SysLocation
(*UnitControl 13)
Applicable to all units. The
unit location.
DisplayString (SIZE(0..34))
*FeatureUpgrade
(*UnitControl 14)
Feature Upgrade
parameters
*FeatureUpgradeManually
(*FeatureUpgrade 1)
Applicable to all units.
Upgrade unit to support
new feature.
DisplayString (SIZE(32..64))
License string: 32 to 64
hexadecimal digits.
Network Management Parameters
Table E-4: Network Management Parameters
MIB Parameter Description Value/Range
*NwMngParameters
(breezeAccessVLMib 3)
Network management
parameters.
*AccessToNwMng
(*NwMngParameters 1)
Applicable to all units. The
port to be used for remote
management.
Integer
fromwirelessOnly (1)
fromEthernetOnly (2)
fromBothWirelessnAndEthernet (3)
na (255)
*NwMngFilter
(*NwMngParameters 2)
Applicable to all units.
Disables or enable IP
address based filtering of
management messages on
one or both ports.
Integer
disable (1)
activateOnEthernetPort (2)
activateOnWirelessPort (3)
activateOnBothWirelessAndEthernet (4)
na (255)