User's Manual

Appendix E - Supported MIBs and Traps
BreezeACCESSS VL System Manual
E-8
Table E-3: Unit Control Parameters
MIB Parameter Description Value/Range
*FTPClientIpAddress
(*FTPParameters 3)
Applicable to all units. The
IP address of the FTP
stack in the unit.
IP address
*FTPServertIpaddress
(*FTPServerParams 4)
Applicable to all units. The
IP address of the FTP
server
IP address
*FTPClientMask
(*FTPParameters 5)
Applicable to all units. The
IP MASK of the FTP stack
in the unit.
IP address
*FTPGatewayIPAddress
(*FTPParameters 6)
Applicable to all units. The
FTP Default Gateway IP
address.
IP address
*FTPSwDownload
(*FTPParameters 2)
Applicable to all units. SW
download parameters.
*FTPSwFileName
(*FTPSwDownload 1)
Applicable to all units. The
name of the SW file to be
downloaded.
DisplayString (SIZE(80)).
Up to 20 printable ASCII
characters. An empty string is
not allowed.
*FtpSwDownloadSourceDir
(*FTPSwDownload 2)
Applicable to all units. The
source directory of the
required file in the FTP
server
DisplayString (SIZE(80)).
Up to 80 printable ASCII
characters. Use “.” To clear
field.
*DownloadSwFile
(*FTPSwDownload 3)
Applicable to all units.
Execution of the SW
download operation.
Integer
downloadFile (1)
cancel (2)
*ConfigurationFileLoading
(*FTPParameters 3)
Applicable to all units.
Configuration file and
Operator Defaults file
download/upload
parameters.
*ConfigurationFileName
(*ConfigurationFileLoading 1)
Applicable to all units. The
name of the configuration
file to be
downloaded/uploaded.
DisplayString (SIZE(80)).
Up to 20 printable ASCII
characters. An empty string is
not allowed.
*OperatorDefaultsFileName
(*ConfigurationFileLoading 2)
Applicable to all units. The
name of the Operator
Defaults file to be
downloaded/uploaded.
DisplayString (SIZE(80)).
Up to 20 printable ASCII
characters. An empty string is
not allowed.
*FTPConfigurationFileSourceDir
(*ConfigurationFileLoading 3)
Applicable to all units. The
source directory of the
required file in the FTP
server
DisplayString (SIZE(80)).
Up to 80 printable ASCII
characters. Use “.” To clear
field.
*ExecuteFTPConfigurationFileLoading
(*ConfigurationFileLoading 4)
Applicable to all units.
Execution of the file
download/upload
operation.
Integer
executeFTPGetConfiguration
File (1)
executeFTPPutConfiguration
File (2)
executeFTPGetOperator
Defaults (3)
executeFTPPutOperator
Defaults (4)
cancel (5)
*EventLogFileUploading
(*FTPParameters 4)
Applicable to all units.
Event Log file upload
parameters.