User's Manual

breezAccessVLMib
Manual Revision 1.0
E-5
Table E-2: System Information Parameters
MIB Parameter Description Value/Range
*CountryDependentParameterEntry
(*CountryDependentParamsTable 1)
Applicable to all units. Not
accessible. An entry in the
country dependent
parameters table.
*CountryDependentParameterTableIdx
(*CountryDependentParameterEntry 1)
Applicable to all units.
Read only. The sub-band
ID of the entry in the
Country Dependent
Parameters table. Serves
also as index for the table
entry.
Integer
*CountryDependentParameterFrequenci
es
(*CountryDependentParameterEntry 2)
Applicable to all units.
Read only. The
frequencies included in the
applicable sub-band entry.
DisplayString
*AllowedBandwidth
(*CountryDependentParameterEntry 3)
Applicable to all units.
Read only. The bandwidth
when using the applicable
the sub-band.
Integer
*MaxAllowedTxPower
(*CountryDependentParameterEntry 4)
Applicable to all units.
Read only. The maximum
allowed Tx power when
using the applicable sub-
band.
Integer
*MaxEIRP
(*CountryDependentParameterEntry 5)
Applicable to all units.
Read only. The maximum
allowed EIRP when using
the applicable sub-band.
Integer
*MinModulationLevel
(*CountryDependentParameterEntry 6)
Applicable to all units.
Read only. The minimum
supported modulation
level.
Integer
level1 (1)
level2 (2)
level3 (3)
level4 (4)
level5 (5)
level6 (6)
level7 (7)
level8 (8)
*MaxModulationLevel
(*CountryDependentParameterEntry 7)
Applicable to all units.
Read only. The maximum
supported modulation
level.
Integer
level1 (1)
level2 (2)
level3 (3)
level4 (4)
level5 (5)
level6 (6)
level7 (7)
level8 (8)
*BurstModeSupport
(*CountryDependentParameterEntry 8)
Applicable to all units.
Read only. The supported
Burst Mode Option.
Integer
supported (1)
notSupported (2)
*MaximumBurstDuration
(*CountryDependentParameterEntry 9)
Applicable to all units.
Read only. Applicable only
if Burst Mode Option is
supported. The maximum
supported burst duration.
Integer
*DfsSupport
(*CountryDependentParameterEntry 10)
Applicable to AU/BU only.
Read only. The supported
DFS Option.
Integer
supported (1)
notSupported (2)