User's Manual

Menus and Parameters
Manual Revision 1.0
4-89
MIR Only Option (AU only)
When the MIR Only Option is enabled, it forces the MIR/CIR algorithm
to use MIR values only. The MIR/CIR algorithm determines the actual
information rate for each of the supported SUs under changing
conditions of demand, based on the configured CIR and MIR values.
When the MIR Only Option is enabled, the MIR/CIR algorithm is
overridden and forced to operate with MIR values only. For example, the
AU attempts to enable all SUs to transmit/receive information at the
specified MIR value. When enabled, the graceful degradation algorithm,
which is a part of the CIR/MIR algorithm, is also disabled.
The default is Enable.
Show MIR/CIR Parameters
Displays the current values of the MIR and CIR parameters.
Show Service Parameters
Displays the current values of the Service Parameters, including the
user filtering parameters and MIR and CIR parameters.