User's Manual

Chapter 4 - Operation and Administration
BreezeACCESSS VL System Manual
4-74
Unicast Relaying (AU only)
The Unicast Relaying option enables selecting whether the unit
performs unicast relaying. When the Unicast Relaying parameter is
enabled, unicast packets originating from devices on the wireless link
can be transmitted back to the wireless link devices. If disabled, these
packets are not sent to the wireless link even if they are intended for
devices on the wireless link. Disable the Unicast Relaying parameter
only if all unicast messages from the wireless link are certain to be
directed to the local wired LAN.
The default selection is Enable.
MAC Address Deny List (AU only)
The MAC Address Deny List submenu enables to define units that are
not authorized to receive services. The AU will not provide services to a
unit whose MAC Address is included in the deny list. This feature
enables to disconnect units from the services in cases such as when the
user had fraudulently succeeded to configure the unit to values
different than his subscription plan. The deny list can include up to 100
MAC Addresses.
The MAC Address Deny List submenu includes the following:
Add MAC Address to Deny List
Select Add MAC Address to Deny List to add a MAC Address to the Deny
List.
Remove MAC Address from Deny List
Select Remove MAC Address from Deny List to remove a MAC Address
from the Deny List.
Show MAC Address Deny List
Select Show MAC Address Deny List to display the current list of MAC
Addresses included in the Deny List.