User's Manual

Menus and Parameters
Manual Revision 1.0
4-73
! Enable, which means that PPPoE Broadcast messages are
transmitted regardless of the selected value of the Filter Options
parameter.
The default selection is Disable.
ARP Broadcast Override Filter
The ARP Broadcast Override Filter option enables or disables the
broadcasting of ARP messages. Even if according to the selected option
in the Filter Options parameter, broadcast messages should be filtered,
ARP broadcasts are transmitted if this parameter is set to Enable. Select
from the following options:
! Disable, which means that ARP messages are filtered or transmitted
according to the general filtering criteria in the Filter Options
parameter.
! Enable, which means that ARP messages are transmitted regardless
of the selected value of the Filter Options parameter.
The default selection is Enable.
Bridge Aging Time
The Bridge Aging Time parameter enables selecting the bridge aging
time for learned addresses of devices on both the wired and wireless
sides, not including BreezeACCESS VL units.
The available range is 20 to 2000 seconds.
The default value is 300 seconds.
Broadcast Relaying (AU only)
The Broadcast Relaying option enables selecting whether the unit
performs broadcast relaying. When the Broadcast Relaying parameter is
enabled, broadcast packets originating from devices on the wireless link
are transmitted by the AU back to the wireless link devices, as well as to
the wired LAN. If disabled, these packets are sent only to the local wired
LAN and are not sent back to the wireless link. Disable the broadcast
relaying only if all broadcast messages from the wireless link are certain
to be directed to the wired LAN.
The default selection is Enable.