User's Manual

Chapter 4 - Operation and Administration
BreezeACCESSS VL System Manual
4-72
Filter Options
The Filter Options enables defining the Ethernet Broadcast filtering
functionality of the unit. Select from the following options:
! Disable, which means no Ethernet Broadcast Filtering.
! On Ethernet Port Only, which filters broadcast messages received
from the Ethernet port.
! On Wireless Port Only, which filters broadcast messages received
from the wireless link port.
! On Both Ethernet and Wireless Ports, which filters broadcast
messages received from both the Ethernet and wireless link ports.
The default selection is Disable.
DHCP Broadcast Override Filter
The DHCP Broadcast Override Filter option enables or disables the
broadcasting of DHCP messages. Even if according to the selected
option in the Filter Options parameter, broadcast messages should be
filtered, DHCP broadcasts are transmitted if this parameter is set to
Enable. Select from the following options:
! Disable, which means that DHCP Broadcast messages are filtered or
transmitted according to the general filtering criteria in the Filter
Options parameter.
! Enable, which means that DHCP Broadcast messages are
transmitted regardless of the selected value of the Filter Options
parameter.
The default selection is Disable.
PPPoE Broadcast Override Filter
The PPPoE Broadcast Override Filter option enables or disables the
broadcasting of PPPoE (Point to Point Protocol over Ethernet) messages.
Even if according to the selected option in the Filter Options parameter,
broadcast messages should be filtered, PPPoE broadcasts are
transmitted if this parameter is set to Enable. Select from the following
options:
! Disable, which means that PPPoE Broadcast messages are filtered
or transmitted according to the general filtering criteria in the Filter
Options parameter.