User's Manual

Chapter 4 - Operation and Administration
BreezeACCESSS VL System Manual
4-68
VLAN Relaying (AU only)
The VLAN Relaying feature is applicable for Trunk Links only. It enables
defining the VLAN ID values to be included in the VLAN Relaying List. If
the Link Type is defined as Trunk Link and the VLAN Relaying Support
option is enabled, a frame relayed from the wireless link, which is a
frame received from the wireless link that should be transmitted back
through the wireless link, with a VLAN ID that is not a member of the
unit's VLAN Relaying List, is discarded. If VLAN Forwarding Support is
also enabled, it is necessary to configure all the VLAN IDs in the
Relaying List also in the Forwarding List to enable the relaying
operation.
The VLAN Relaying menu provides the following options:
VLAN Relaying Support
The VLAN Relaying Support option enables or disables the VLAN
Relaying feature.
Available selections are Disable and Enable.
The default selection is Disable.
Add Relaying VLAN ID
The Add Relaying VLAN ID option enables adding a VLAN ID to the
VLAN Relaying List. One VLAN ID can be entered at a time. The
maximum number of VLAN IDs in the VLAN Relaying List is 20.
Valid values are 1 to 4094.
Remove Relaying VLAN ID
The Remove Relaying VLAN ID option enables removing a VLAN ID from
the VLAN ID Relaying List. Valid values are VID values (from 1 to 4094))
that are included in the VLAN Relaying List.
Show VLAN ID Relaying List
The Show VLAN Relaying option displays the values of the VLAN IDs
included in the VLAN Relaying List.
NOTE
If the VLAN ID Relaying List is empty and the VLAN Relaying Support is Enabled, then
all data frames relayed from the wireless link are discarded.
If VLAN Relaying Support and VLAN Forwarding Support are both enabled, then all
VLAN IDs configured in the Relaying List must also be configured in the Forwarding List.