User's Manual

Chapter 4 - Operation and Administration
BreezeACCESSS VL System Manual
4-64
! A VLAN Management Tag is inserted in all management frames
generated by the unit before transmission on either the Ethernet or
wireless link port. The tag includes the values of the VLAN ID-
Management and the VLAN Priority-Management parameters.
If the VLAN ID-Management is 65535 (No VLAN):
! Only untagged management frames received on either the Ethernet
or wireless link ports are forwarded to the unit.
! Management frames generated by the unit are not tagged.
The following table summarizes the functionality of the internal
management port in accordance with the value of the VLAN ID-
Management parameter. The table is valid for all link types. Refer to the
VLAN Link Type - Access Link and Trunk Link options for some
restrictions when configuring this parameter.
Table 4-5: VLAN Management Port Functionality
Action Management Port - Internal
Receive from Ethernet Tagged frames, matching VID-M
Untagged frames when VID-M=65535
Receive from Wireless Tagged frames, matching VID-M
Untagged frames when VID-M=65535
Transmit Insert VID-M, PID-M
Table Legend:
! VID-M: VLAN ID-Management
! PID-M: VLAN Priority-Management
VLAN Link Type
The VLAN Link Type parameter enables defining the functionality of the
VLAN aware capability of the unit.
The available options are Hybrid Link, Trunk Link and Access Link
(Access Link option is available only in SUs).
The default selection is Hybrid Link.
Access Link (SU only)
Access Link transfers frames while tagging/untagging them since all
devices connected to the unit are VLAN unaware. Thus, the unit cannot
transfer tagged frames.