User's Manual

Menus and Parameters
Manual Revision 1.0
4-63
VLAN ID-Data (SU only)
The VLAN ID-Data is applicable only when the VLAN Link Type
parameter is set to Access Link. It enables defining the VLAN ID for data
frames, which identifies the VLAN to which the unit belongs.
Valid values range from 1 to 4094.
Default value: 1.
The VLAN ID-Data affects frames received from the wireless link port, as
follows:
! Only tagged frames with a VLAN ID (VID) equal to the VLAN ID-Data
defined in the unit are forwarded to the Ethernet port.
! The tag headers are removed from the data frames received from the
wireless link before they are transmitted on the Ethernet port.
The VLAN ID-Data affects frames received from the Ethernet port, as
follows:
! A VLAN Data Tag is inserted in all untagged frames received from
the Ethernet port before transmission on the wireless link. The tag
includes the values of the VLAN ID-Data and the VLAN Priority-
Data parameters.
! Tagged frames received on Ethernet port, which are meant to be
forwarded to the wireless link port, are discarded. This includes
frames with tagging for prioritization purpose only.
VLAN ID-Management
The VLAN ID-Management is applicable for all link types. It enables
defining the VLAN ID for management frames, which identifies remote
stations for management purposes. This applies to all management
applications using protocols such as SNMP, TFTP, ICMP (ping), DHCP
and Telnet. All servers/stations using these protocols must tag the
management frames sent to the unit with the value of the VLAN ID-
Management parameter.
Valid values: 1 to 4094 or 65535 (No VLAN).
The default value is 65535.
If the VLAN ID-Management is other than 65535:
! Only tagged management frames with a matching VLAN ID received
on either the Ethernet or wireless link ports are forwarded to the
unit.