User's Manual

Menus and Parameters
Manual Revision 1.0
4-61
Delete a Network Management IP Address
The Delete Network Management IP Address option enables deleting IP
address entries from the Network Management IP Addresses list.
Delete All Network Management IP Addresses
The Delete All Network Management IP Addresses option enables
deleting all entries from the Network Management IP Addresses list.
SNMP Traps
The SNMP submenu enables or disables the transmission of SNMP
Traps. If this option is enabled, up to 10 IP addresses of stations to
which SNMP traps are sent can be defined.
Send SNMP Traps
The Send SNMP Traps option enables or disables the sending of SNMP
traps.
The default selection is Disable.
SNMP Traps Destination IP Addresses
The SNMP Traps Destination IP Addresses submenu enables defining
up to 10 IP addresses of devices to which the SNMP Traps are to be
sent.
The default of all 10 SNMP Traps IP destinations is 0.0.0.0.
SNMP Traps Community
The SNMP Traps Community option enables defining the Community
name for each IP address to which SNMP Trap messages are to be sent.
Valid strings: Up to 8 ASCII characters.
The default for all 10 addresses is “public”, which is the default Read
community.
Delete One Trap Address
The Delete One Trap Address option enables deleting Trap address
entries from the SNMP Traps Addresses list.
Delete All Trap Addresses
The Delete All Trap Addresses option enables deleting all entries from
the SNMP Traps Addresses list.