User's Manual

Menus and Parameters
Manual Revision 1.0
4-43
Frequency Definition Submenu in AU
The Frequency Definition submenu in AU includes the following
parameters:
Sub Band Select
This parameter is available only if the country code supports two or
more Sub Bands. For information on how to view the Sub Bands
supported by the unit and the supported parameters’ values and
options, refer to Show Country Dependent Parameters
on page 4-9.
The range depends on the number of Sub Bands supported by the
country code.
The default selection is Sub Band 1.
Frequency
The Frequency parameter defines the transmit/receive frequency when
the DFS Option is not enabled. If the DFS Option is enabled, it sets the
initial operational frequency upon starting the DFS mechanism the first
time.
The range depends on the selected Sub Band.
The default is the lowest frequency in the Sub Band.
DFS Parameters
The DFS Parameters submenu is available only if DFS is supported by
the current Sub Band. The DFS Parameters submenu includes the
following parameters:
DFS Option
The DFS Option enables or disables the radar detection and dynamic
frequency selection mechanism.
The default is Enable.
Frequency Subset Definition
The Frequency Subset Definition parameter defines the frequencies that
will be used in the DFS mechanism. The available frequencies according
to the Sub Band are displayed, and each of the frequencies in the list is
associated with an index. The frequencies subset can be defined by
entering the indexes of the required frequencies, or “A” to select all
available frequencies.
The default is the complete list of frequencies available in the Sub Band.