User's Manual

Menus and Parameters
Manual Revision 1.0
4-33
! Display Association Info: Displays information regarding the
Subscriber Units associated with the AU. Each list entry includes
the following information:
# The MAC Address of the associated Subscriber Unit
# The value configured for the Maximum Modulation Level
parameter of the Subscriber Unit
# The Status of the Subscriber Unit. There are three options:
A. Associated
B. Authenticated
C. Not Authenticated (a temporary status)
The various status states are described below (this is a
simplified description of the association process without the
effects of the Best AU algorithm).
Table 4-4: Authentication and Association Process
Message Direction Status in AU
SU Status: Scanning
A Beacon with correct ESSID AU → SU -
SU Status: Synchronized
Authentication Request SU → AU Not authenticated
Authentication Successful AU → SU Authenticated
SU Status: Authenticated
Association Request SU → AU Authenticated
Association Successful AU → SU Associated
SU Status: Associated
ACK SU → AU Associated
Data Traffic SU ↔ AU Associated
# The SNR measured at the SU
# The SW version of the SU.
# Distance.
# Unit Type.