User's Manual

Menus and Parameters
Manual Revision 1.0
4-31
! Ping Frame Timeout: The ping frame timeout, which is the amount
of time (in ms) between ping attempts. The available range is from
100 to 60,000 ms. The default value is 200 ms.
! Start Sending: Starts the transmission of ping frames.
! Stop Sending: Stops the transmission of ping frames. The test is
automatically ended once the number of pings has reached the
value specified in the No. of Pings parameter, described above. The
Stop Sending option can be used to end the test before completing
the specified number of pings, or if continuous pinging is selected.
! Show Ping Test Values: Displays the current values of the ping test
parameters, the transmission status, which means whether it is
currently sending or not sending pings, the number of pings sent,
and the number of pings received, which means the number of
acknowledged frames.
Continuous Link Quality Display (SU only)
The Continuous Link Quality Display option displays continuously
updated information regarding the average quality of the received signal
using Signal to Noise Ratio (SNR) measurements.
Click the Esc key to abort the test.
MAC Address Database
The MAC Address Database submenu includes the following options:
! MAC Address Database in AU
! MAC Address Database in SU
MAC Address Database in AU
The MAC Address Database option in the AU displays information
regarding the Subscriber Units associated with the AU, as well as
bridging (forwarding) information. The following options are available:
! Display Bridging and Association Info: The Display Bridging and
Association Info option displays a list of all the Subscriber Units and
stations in the AU's Forwarding Database. For stations behind an
SU, the SU's MAC address is also displayed (SU Address).
Each MAC address entry is followed by a description, which may
include the following:
# Et (Ethernet): An address learned from the Ethernet port.