User's Manual

Chapter 4 - Operation and Administration
BreezeACCESSS VL System Manual
4-30
! Total received data frames: The total number of data data frames
received from the wireless media, including duplicate frames. Refer
to Duplicate frames discarded below.
! Total Rx events: The total number of frames that were not received
properly. The following additional counters are displayed to indicate
the reason for the failure:
# Phy: Applicable only when DFS is enabled. The number of
unidentified signals.
# CRC: The number of frames received from the wireless media
containing CRC errors.
# Overrun: The number of frames that were discarded because the
receive rate exceeded the processing capability or the capacity of
the Ethernet port.
# Decrypt: The number of frames that were not received properly
due to a problem in the data decryption mechanism.
! Bad fragments received: The number of fragments received from
the wireless media containing CRC errors.
! Duplicate frames discarded: The number of data frames discarded
because multiple copies were received. If an acknowledgement
message is not received by the originating unit, the same data frame
can be received more than once. Although duplicate frames are
included in all counters that include data frames, only the first copy
is forwarded to the Ethernet port.
! Internally discarded MIR\CIR: The number of data frames
received from the Ethernet port that were discarded by the MIR/CIR
mechanism to avoid exceeding the maximum permitted information
rate.
Ping Test
The Ping Test submenu is used to control pinging from the unit and
includes the following options:
! Destination IP Address: The destination IP address of the device
being pinged. The default IP address is 192.0.0.1.
! Number of Pings to Send: The number of ping attempts per
session. The available range is from 0 to 9999. The default value is
1. Select 0 for continuous pinging.
! Ping Frame Length: The ping packet size. The available range is
from 60 to 1472 bytes. The default value is 64 bytes.