User's Manual

About this Guide
This manual describes the BreezeACCESS VL Broadband Wireless
Access System Release 2.0 and how to install, operate and manage the
system components.
This guide is intended for technicians responsible for installing, setting
up and operating the BreezeACCESS VL system, and for system
administrators responsible for managing the system.
This guide contains the following chapters and appendices:
! Chapter 1 – System description: Describes the BreezeAccess VL
system and its components.
! Chapter 2 – Installation: Describes how to install the system
components.
! Chapter 3 – Commissioning: Describes how to configure basic
parameters, align the Subscriber Unit antenna and validate unit
operation.
! Chapter 4 – Operation and Administration: Describes how to use
the BreezeACCESS VL Monitor application for configuring
parameters, checking system status and monitoring performance.
! Appendix A – Software Version Loading Using TFTP: Describes
how to load a new software version using TFTP.
! Appendix B – File Download and Upload Using TFTP: Describes
how to download and upload configuration files using TFTP. This
procedure is also applicable for uploading country code and feature
license files.
! Appendix C – Using the Restore Link Parameters Utility:
Describes how to use the special Restore Link Parameters utility to
enable management access to units where wrong or unknown
configuration disables regular access to the unit for management
purposes.