Installation Manual

Introduction
SU-R Installation Manual 1 BreezeACCESS MMDS Series
1. INTRODUCTION
This manual describes installation guidelines for BreezeACCESS MMDS SU-R Subscriber Units.
The BreezeACCESS Broadband Wireless Access system allows access service providers to
provide high-speed IP connectivity services to their subscribers. To support IP-based services
effectively BreezeACCESS systems employ wireless packet data switching technology.
The BreezeACCESS MMDS line of products uses Frequency Hopping Spread Spectrum radios
that operate in Time Division Duplex (TDD) mode in the 2.500GHz – 2.686GHz frequency
range.
The SU-R-MMDS line of Subscriber Units comprises compact units that are designed for indoor
installation. SU-R units are available in several models differing from each other in the type of
supported data networks and availability of voice services as follows:
• SU-R-8D units support up to 8 Ethernet workstations / PCs (8 MAC addresses).
• SU-R-BD units provide a full bridge functionality supporting up to 512 MAC addresses.
• SU-R-8D1V support up to 8 Ethernet workstations / PCs and have an interface to a standard
telephone set.
SU-R-MMDS units are available either with an indoor wall/window mountable 7 dBi UNI-7
antenna (-A7 models) or with an adapter for an external separate antenna.
Note:
The information contained in this manual is applicable to BreezeACCESS SU-R-MMDS
units with software release 3.0 and up.