Installation Manual

Configuring System Parameters
BreezeACCESS MMDS Series 10 SU-R Installation Manual
1. From the
main menu
, type
3
to access the
Basic Configuration
menu.
2. From the
Basic Configuration
menu, type
4
to access the
ESSID
selection screen. Enter the
required ESSID.
3. Type
D
to access the
DHCP Client
menu. Type
1
to access the
DHCP Options
menu and
select the required option. If the selected option was other than
Disable
, type
2
to access the
Access to DHCP
menu and select the required option.. If the
DHCP Only
option was
selected, go to step 7. Otherwise (if either the
Disable
or
Automatic
options were selected),
perform steps 4-6.
4. Type
1
to access the
IP Address
selection screen. Enter the required IP address.
5. Type
2
to access the
Subnet Mask
selection screen. Enter the required subnet mask.
6. Type
3
to access the
Default Gateway Address
selection screen. Enter the required default
gateway address.
7. Type
F
to access the Flexible Hopping Definition menu. Use the Add/Remove Channels or
the Add/Remove Frequencies screen to define the channels/frequencies to be used. See
Appendix B for a list of the standard channels and frequencies.
8. Type
G
to access the
Transmit Antenna
selection screen. Enter the required selection. For
SU-R units with a single antenna connected to antenna port 1, select 1 - use antenna # 1.