User's Manual

Maximum Data Rate Configuration
BreezeACCESS II Series 14 SU-R Installation Manual
5. MAXIMUM DATA RATE CONFIGURATION
1. If the average RSSI reading using the Continuous Link Quality Display (see Section 4.1) is
lower than 65, the unit should be configured in accordance with the following table:
RSSI Recommended
Maximum Data Rate
RSSI > 65 3Mbps
53 < RSSI < 65 2Mbps
RSSI < 53 1Mbps
2. From the
main menu
, type
3
to access the
Basic Configuration
menu. Type
5
to access the
Maximum Data Rate
menu.
• Type
3
(3Mbps) if the RSSI reading is higher than 65 units.
• Type
2
(2Mbps) if the RSSI reading is between 53 to 65 units.
• Type
1
(1Mbps) if the RSSI reading is lower than 53 units.
3. Reset the unit for the new configuration to become effective
See Appendix C for more details on the Maximum Data Rate parameter.