User's Manual

Configuring System Parameters
SU-R Installation Manual 11 BreezeACCESS II Series
3.3 Reset Unit
1. From the
main menu
, type
2
to access the
Unit Control
menu.
2. Type
1
to access the
Reset Unit
menu. Type
1
to reset the unit so that new configuration
settings are applied.
Note:
Should you make any mistakes during configuration or encounter any problems associated
with system configuration parameters, you may configure the unit back to the factory
defaults, as follows:
Type
2
in the Unit Control menu to access the Set Factory Defaults menu. Type in
2
(Set
Factory defaults-Full) to load the default values. Reset the unit for the factory defaults
values to take effect.