User's Manual

BreezeACCESS MMDS Series 1 SU-I-D Installation Manual
1. INTRODUCTION
This manual describes installation guidelines for BreezeACCESS-MMDS SU-I
Subscriber Units.
The BreezeACCESS IP Broadband Wireless Local Loop (WLL) system allows
access service providers to provide high-speed IP connectivity services to their
subscribers. To support IP-based services effectively BreezeACCESS systems
employ wireless packet data switching technology.
The BreezeACCESS 2.5 line of products uses Frequency Hopping Spread
Spectrum radios that operate in Time Duplex Division (TDD) mode in the
2.500GHz – 2.686GHz frequency range.
The SU-I-D-MMDS line of Subscriber Units comprises compact units that are
designed for indoor installation. Antennas can be installed either indoors or
outdoors, depending on the specific site conditions. The SU-I-D-MMDS series
include the following products:
•
SU-I-1D-MMDS: supports a single Ethernet device
•
SU-I-8D-MMDS: supports up to eight Ethernet workstations/PCs
•
SU-I-BD-MMDS: supports a LAN (a bridge functionality)
Note:
The information contained in this manual is applicable to BreezeACCESS
MMDS units with software release 2.3.