User's Manual

Appendix A
SU-I-D Installation Manual 24 BreezeACCESS-MMDS Series
7. Plug the power cable leading from the Power Inserter into any available
110/220V outlet. The power supply must be installed indoors.
8. For reception, use a separate antenna connected to the other antenna
connector of the BreezeACCESS unit.
Note:
Installations exceeding regulations set by local authorities expose the
installer and the user to potential legal and financial liabilities.
A.1.2 TPA 24 Transmit Power Amplifier Specifications
Models used with the
BreezeACCESS Series
• TPA 24 NL
• TPA 24 NH
Input Power • TPA 24 NL: -10dBm - 0dBm (Low input)
• TPA 24 NH: 0dBm - +10dBm (High input)
Output Power 24 dBm (250mW) (fixed output level)
Input Impedance 50W
Output Impedance 50W (DC short)
Operating Temperature -20° to 50°C
Power Requirements 12V; 420 mA (Power Supply and Power Inserter
are supplied with models TPA-24 NL and
TPA-24 NH)
Connectors • TPA 24: IN - N-type Male; OUT - N-type
Female
• Power Inserter: RF - N-type Male; RF&DC - N-
type female
Dimensions 70mm x 150mm x 25mm (2.8”x 6”x 1”)
Operating Environment • TPA 24 - For outdoor/indoor use
• Power Supply - For indoor use
• Power Inserter - For indoor use
Note: All specifications are subject to change without notice.