User's Manual
Appendix A. Radio Signal Propagation
BreezeNET DS.11 Series A-7 User’s Guide
network adapters appears, press Have Disk.
b.
Go to the Adapters tab, press Add, and then press Have Disk.
3.
Insert the BreezeCOM drivers diskette, enter the location of the diskette (such as a:\) and
press OK.
4.
From the list choose BreezeNET Wireless LAN PC Card and press OK. The PC-DS.11
LAN Adapter Properties window appears.
Figure 4.1: PC-DS.11 LAN Adapter Properties Window
5.
The default settings are memory range D0000h to D3FFFh, IRQ 11. In the following steps
we will verify that these default settings are acceptable for your machine.
Note:
If the PC-DS.11 Configuration application is already installed, you can access it
directly by pressing
Advanced
.
6.
Press the Windows Start button and select Run. Type WINMSD and press OK. The
Windows NT Diagnostics window appears.