User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 407 System Manual
3.4.15.1.2 Deleting an Entry for the SNMP Manager
To delete an SNMP Manager entry, run the following command:
npu(config)# no snmp-mgr index <integer>
IMPORTANT
An error may occur if you have specified:
 More than five entries for the SNMP Manager
 Duplicate entries (an snmp-mgr entry is uniquely identified by values for "ReadCommunity" and
"WriteCommunity")
Command
Syntax
npu(config)# snmp-mgr [ReadCommunity <string>] [ReadWriteCommunity <string>]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[ReadCommunity
<string>]
The SNMP Read Community
string allowing execution of
SNMP Get operations.
Optional public String (up to 10
characters and
case-sensitive)
[ReadWriteCommu
nity <string>]
The SNMP Read/Write
Community string allowing
execution of SNMP Set and
Get operations.
Optional private String (up to 10
characters and
case-sensitive)
Command
Modes
Global configuration mode
IMPORTANT
An error may occur if you provide an incorrect index number for the SNMP Manager to be deleted. To
display the index numbers for configured SNMP Managers, refer
Section 3.4.15.1.3.
Command
Syntax
npu(config)# no snmp-mgr index <integer>