User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 446 System Manual
3.4.16.7.2 Displaying the Site General Information Parameters
To display configuration information for the site general information parameters,
run the following command:
npu# show site [{Name | Address | RackLocation | ContactPerson
|ProductType}]
In addition to the configurable parameter (see Section 3.4.16.7.1), you can also
display the Product Type.
If you want to display configuration information for one parameter, specify only
the required parameter. If you want to display configuration information for all dry
contact alarms, run the following command:
npu# show site
Command
Syntax
npu(config)# site (Name <name (32)> | Address <address(70)> | RackLocation <rack no. + position
in rack (32)> | ContactPerson <name (32)>)
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
Name <name
(256)>}
Indicates the name of the
4Motion shelf.
Optional N/A String (up to 32
characters)
Address <address
(256)>}
Indicates the address of the
4Motion site.
Optional N/A String (up to 70
characters)
RackLocation
<rack no. +
position in rack
(256)>}
Indicates the rack number
and location of the 4Motion
shelf.
Optional N/A String (up to 32
characters)
ContactPerson
<name (256)>
Indicates the name of person
who is administering the
4Motion shelf.
Optional String (up to 32
characters)
Command
Modes
Global configuration mode