User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 402 System Manual
3.4.14 Configuring Performance Data Collection
You can configure 4Motion to periodically collect and store performance
counters.For details on the counters groups and the performance data counters
collected for each group refer to the relevant 4Motion Performance Management
document.
You can specify the group for which performance data is to be stored and
collected.
The data is stored in an XML file called, prf_<SiteID>_yyyymmddhhmm.xml.gz in
the path,/tftpboot/management/performance. The system maintains this data for
a maximum of 24 hours after which it is deleted. It is recommended that you
periodically make a backup of these files on an external server.
You can enable/disable collection of performance data for each group separately.
This section describes:
“Enabling Collection and Storage of Historical Performance Data” on page 403
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[{StartupMgr
|S
WDownload|Faul
tMgr
|PerfMgr|
ShelfMgr|SIGAS
N|UserIF|AUMg
r}]
Indicates the name of the
module for which logging is to
be disabled.
If you do not specify any
value for this parameter,
logging is disabled for all
parameters. For more
information about these
modules, refer
Table 3-24.
Optional N/A
StartupMgr
SWDownloa
d
FaultMgr
PerfMgr
ShelfMgr
SIGASN
UserIF
AUMgr
Command
Modes
Global configuration mode