User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 432 System Manual
3.4.16.2.11 Displaying the Position Parameters
To display the current position parameters, run the following command:
npu# show position [{Latitude | Longitude | Altitude}]
3.4.16.2.12 Displaying the Number of Satellite Parameters
To display the current satellite parameters, run the following command:
Privilege
Level
1
Display
Format
Saving mode :<enabled/disabled>
Start date :<value or not configured>
Stop date :<value or not configured>
Command
Modes
Global command mode
Command
Syntax
npu# show position [{Latitude | Longitude | Altitude}]
Privilege
Level
1
Syntax
Description
For a detailed description of each parameter in this command, refer the section,
“Configuring
the Position” on page 426
.
Display
Format
Latitude :
Longitude :
Altitude :
Command
Modes
Global command mode