User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 401 System Manual
3.4.13.2.3 Disabling Module-level Logging
To disable logging for one or all system modules, run the following command:
npu(config)# no log level
[{StartupMgr|SWDownload|FaultMgr|PerfMgr|ShelfMgr|SIGASN|UserIF|AU
Mgr}]
Specify the name of the module if you want to disable logging for a specific
module. If you do not specify the module name, logging is disabled for all
modules.
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[{StartupMgr
|S
WDownload|Faul
tMgr
|PerfMgr|
ShelfMgr|SIGAS
N|UserIF|AUMg
r}]
Indicates the name of the
module for which you want to
view the configured severity
level. For more information
about these parameters, refer
Table 3-24.
If you do not specify any
value for this parameter, the
severity level is displayed for
all modules.
Optional N/A
 StartupMgr
 SWDownloa
d
 FaultMgr
 PerfMgr
 ShelfMgr
 SIGASN
 UserIF
 AUMgr
Display
Format
Module Name : Log level
<Module Name> : <Log Level>
Command
Modes
Global configuration mode
Command
Syntax
npu(config)# no log level
[{StartupMgr
|SWDownload|FaultMgr|PerfMgr|ShelfMgr|SIGASN|UserIF|AUMgr}]