User Manual
Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 427 System Manual
npu(config)# set position ([Latitude <xx.xxx,N/S>] [Longitude
<xxx.xxx,E/W>] [Altitude (-300 - 9000)])
IMPORTANT
An error may occur if :
1) Latitude, longitude and altitude are configured while GPS type is not "None".
2) Latitude is not in valid format i.e. ll.mmm,a where a is either N or S
3) Longitude is not in valid format i.e. lll.mmm,a where a is either E or W.
4) Altitude is not in valid range i.e. +-300 to 9000.
Command
Syntax
npu(config)# set position ([Latitude <xx.xxx,N/S>] [Longitude <xxx.xxx,E/W>] [Altitude (-300 -
9000)])
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
Latitude
<xx.xxx,N/S>
Indicates the latitude where
the 4Motion shelf is currently
positioned. Configure only if
GPS Type is None.
Optional 00.000,N Use the format,
ll.mmm.a
(where ll.mmm
is in degrees
and the value
of a is either N
or S).
ll is between 00
to 89, mmm is
between 000 to
999.