User Manual

Chapter 3 - Operation and Administration of the Macro BTS NPU Configuration
4Motion 400 System Manual
3.4.13.2.2 Displaying Configuration Information for Module-level Logging
To display the log level configured for one or all modules, run the following
command.
npu(config)# show log level
[{StartupMgr|SWDownload|FaultMgr|PerfMgr|ShelfMgr|SIGASN|UserIF|AU
Mgr}]
Specify the module for which you want to view the configured severity level. If you
do not specify the name of the module, the log level configured for all modules is
displayed.
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[{StartupMgr
|S
WDownload
|Faul
tMgr|PerfMgr|
ShelfMgr|SIGAS
N
|UserIF|AUMg
r}]
Indicates the name of the
module for which the severity
level is to be specified.
If you do not specify any
value for this parameter, the
severity level that you specify
is applied for all modules. For
more information about these
parameters, refer
Table 3-24.
Optional N/A
 StartupMgr
 SWDownloa
d
 FaultMgr
 PerfMgr
 ShelfMgr
 SIGASN
 UserIF
 AUMgr
{ALERT
|ERROR|
INFO}
Indicates the severity level to
be applied to a particular or
all modules.
Mandatory Error
 ALERT
 ERROR
 INFO
Command
Modes
Global configuration mode
Command
Syntax
npu(config)# show log level
[{StartupMgr|SWDownload|FaultMgr|PerfMgr|ShelfMgr|SIGASN|UserIF|AUMgr}]