User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs

4Motion 546 System Manual

3.9.9.7 Displaying Configuration Information for Neighbor BS

Parameters

You can display the current configuration information for the following Neighbor

BS parameters tables:

 General (refer to Section 3.9.9.7.1)

 Required C/N Level (refer to Section 3.9.9.7.2)

 Triggers (refer to Section 3.9.9.7.3)

 All (refer to Section 3.9.9.7.5)

3.9.9.7.1 Displaying Configuration Information for Neighbor BS General

Parameters

To display configuration for the Neighbor BS General parameters, run the

following command:

npu# show nbr-general bs [<(1 to 16777215 StepSize 1)> bs-id-lsb <(1 to

16777215 StepSize 1)>]

Specify the BS ID and the Neighbor BS ID (bs-id-lsb) if you want to display

configuration for a particular Neighbor BS in a particular BS. For example, to

display the General parameters of Neighbor BS 68000 in BS 66503, run the

following command:

npu# show nbr-general bs 66053 bs-id-lsb 68000

Do not specify these parameters if you want to view configuration information for

all existing Neighbor BSs in all existing BSs. To display information for all

Neighbor BSs in all BSs, run the following command:

npu# show nbr-general bs

Command

Syntax

npu# show nbr-general bs [<(1 to 16777215 StepSize 1)> bs-id-lsb <(1 to 16777215

StepSize 1)> ]

Privilege

Level