User Manual

Chapter 3 - Operation and Administration of the Macro BTS Managing BSs
4Motion 545 System Manual
3.9.9.6 Deleting a Neighbor BS
Run the following command from the BS configuration mode to delete a Neighbor
BS:
npu(config-bs 66053)# no nbr <(1 to 16777215 StepSize 1)>
IMPORTANT
Do not forget to execute the apply command before terminating the Neighbor BS configuration
mode: npu(config-bs-66053-nbr-68000)# apply
Command
Syntax
npu(config-bs-66053-nbr-68000)# exit
Privilege
Level
10
Command
Modes
bs neighbor bs configuration mode
Command
Syntax
npu(config-bs 66053)# no
nbr <(1 to 16777215 StepSize 1)>
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The Neighbor BS ID
(bs-id-lsb)
Mandatory N/A 1-16777215
Command
Modes
bs configuration mode